Natural Gas Stenter Setting Machine. textile machinery
Basic Info
Model No.: TS-DX
Product Description
Machine Usage:
GHLD2800 hot air stenter is mainly used for the cotton, polyester, wool, hemp of setting process for the open width fabrics, after worked by the machine, you can get stable size of the fabrics.
Technical flow:
open width fabrics infeed -- infra red expanding and centering -- padder -- zidond lower overfeeding -- screw expanding -- machincial weft straighter -- upper overfeeding -- edge spreader -- infra-red inspector -- pin on -- heat setting -- coolant -- pin off -- exit -- plaiter or rolling.
Mainly technical parameters
| Machine working pattern: | chains circulation horizontal rotary |
| Heat setting pattern: | hot air circulation |
| Chains pattern: | pitch 60mm, stainless steel chains. Rail pattern stainless steel rail, graphite strip, non oil lubrication |
| Machine standard power: | 380V(±5%)50Hz3PH |
| Control power: | 220V, 24V |
| Applicable steam specification: | 3-6Kg/cm²saturated steam |
| Steam comsumption | 00~150kg/hour |
| Applicable compressed air specification | 0.3-0.6Mpa compressed airwithout moisture |
| Maximum temperature of the heating chamber | 220℃ |
| Applicable heat sourch | A. Circulation thermal oil B. 2Kpa-3.5Kpa natural gas |
| Circulation oil consumption | 80000-140000Kcal/ H·chamber(0.33-0.6GJ) |
| Natural gas consumption | 8-15m³/H·chamber(about6.5-12KG) |
| Main chain driven pattern | right and left chains drive seperately |
| Working width control pattern | working width of each chamber adjust seperately |
| Air delivery pattern of the heating chamber | upper blower chamber and lower blower chamber control air volume seperately. |
| Pin plate maximum working width | 2000mm-3000mm |
| Heating chamber width | 000mm/chamber |
| Machincial speed | 5~80m/min |
| Power of some parts | Padder: 12.5kw Gluming, cutting, sucking device 6.74 KW(optional) Pneumatic edge spreader 3KW Driven device 45 KW Each chamber power: 15.75kw Machine dimension(Max) L=18000+3000mm/chamber*Nchamber W=2700+working width H=3000 |
| Machine weight | about 12tons+4.5ton/chamberxN chamber |
| Machine colour | jewelry blue + Crystal White |
| Insulated pannel thickness | 150mm |
Contact us if you need more details on Natural Gas Stenter Setting Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Stenter Setting Machine、Stenter Setting Machine. Textile Machinery. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Fabric Dyeing Machine And Finishing > Garment Dyeing Machine And Finishing